Wireless Access

Reply
Highlighted
Contributor I

Unable to force a role change in 8.4.0.2

Just curious is anyone has seen this and/or has a workaround. I am trying to test new roles prior to deployment and am unable to force the user to a new role if they authenticated via web(splash page). It works if they authenticated with any other method.

 

I'm using the aaa user add <IP> role <role> command

Highlighted
Guru Elite

Re: Unable to force a role change in 8.4.0.2

Is this a clustered environment?


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Knowledgebase
Airheads Video Knowledge Base
Remote Access Point Solution Guide
ArubaOS Consolidated Release Notes
ArubaOS 8 ViA VPN Solution Guide
Highlighted
Contributor I

Re: Unable to force a role change in 8.4.0.2

Yes

Highlighted
Guru Elite

Re: Unable to force a role change in 8.4.0.2

I replicated it in a separate environment, but not based on 8.4.  Other people cannot replicate it on your version or mine.  Can you open a TAC case so they can look at your setup?


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Knowledgebase
Airheads Video Knowledge Base
Remote Access Point Solution Guide
ArubaOS Consolidated Release Notes
ArubaOS 8 ViA VPN Solution Guide
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: