Wireless Access

Reply
Highlighted
Occasional Contributor II

Upgrade from 6.1.2.7 to 6.1.3.8 Causes Client to behave badly

So I recently upgrade AOS to 6.1.3.8. Immediately after we began getting complaints that clients connecting using 802.1x  tkip aes are getting disconnected.  I visited the floor and notice that the wireless bars in windows are fluctuations excessively between 5.5 GHz and 300 that is from 1 bar all the way up to 4 bars.   There are no busy channel;   SNR will be 50-40 then suddenly drop down to 17 and lower.   I try adding a AP next to the client and it seems  worked. I move the AP 10 feet away and it started the erratic  behavior again. This an open area with no walls blocking.

 

 

Has anyone notice any similar behavior? 

Guru Elite

Re: Upgrade from 6.1.2.7 to 6.1.3.8 Causes Client to behave badly

jmaxwell,

 

I would consider upgrading to 6.1.3.9.  There is a fixed bug with WPA-TKIP clients 83776 in the attached release notes.

 

 


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Aruba Central Documentation
ArubaOS Consolidated Release Notes
Aruba Technical Webinars
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: