Wireless Access

last person joined: 16 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

Upgrade of 6000 controller to 6.1.3.8

This thread has been viewed 1 times

  • 1.  Upgrade of 6000 controller to 6.1.3.8

    Posted Aug 07, 2013 03:32 AM

    Hi,

        I am trying to upgrade a 6000 series with a single M3 from AOS 6.1.3.1 to 6.1.3.8 using the GUI but it is showing an error something like "not supported on this platform". the file I am trying to upload is - ArubaOS_MMC_6.1.3.8_38170.

    Any reason why this might not be working?



  • 2.  RE: Upgrade of 6000 controller to 6.1.3.8

    Posted Aug 07, 2013 07:09 AM

    A. Try to download the image file agian - it might be broken file

    B. Before upgrading clear old unneeded files/backups from the controller

    C. Try to upgrade using TFTP

     

     



  • 3.  RE: Upgrade of 6000 controller to 6.1.3.8
    Best Answer

    Posted Sep 04, 2013 10:22 AM

    This was overcome by placing the file closer to the device rather than across a VPN. Not sure the exact cause of failure but managed to work around the issue.



  • 4.  RE: Upgrade of 6000 controller to 6.1.3.8

    Posted Jun 11, 2014 10:30 AM

    Any issues after the upgrade?