Wireless Access

Reply
Occasional Contributor II

VC shows down in Airwave

We have implemented AP205 in our network in IAP mode, which will be running by virtual controller. But all the configuration will be pushed through Airwave. Suddenly  in Airwave VCs and access poinst are shows down.

Jun 22 09:01:25  awc[1740]: awc_connect to 10.0.0.10
Jun 22 09:01:25  syslog: check_sid_type: sid check type, result-'0 rock'
Jun 22 09:01:35  awc[1740]: tcp_connect: 128: select return: 0
Jun 22 09:01:35  awc[1740]: tcp_connect: 146: failed to connect, close the fd
Jun 22 09:01:35  awc[1740]: awc_connect: 2500: failed to connect to 10.0.0.10 Error: Operation now in progress
( The same log is repeating continuously)

Guru Elite

Re: VC shows down in Airwave

Was it ever up?

Was anything changed?


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: