Wireless Access

New Contributor

VIA client subnet access issue

I have little experience setting Controller (Aruba 620 with 6.0.1 firmware) but I could get VIA client authenticate with the controller. However I had an issue where the LAN subnet is not advertise and not reachable from VIA. Attached is the simple network sketch showing you that the controller is placed in DMZ network.


Once VIA authenticated with controller, it received from the DHCP pool. It can never reach the web server in LAN port 4 subnet (which is When I check VIA client route table, the subnet is not injected into OS so I manually add it myself but not working either.


Does anyone have clue with this issue?


Thanks in advance.




Guru Elite

Re: VIA client subnet access issue

Your infrastructure would need a route for pointing to the management interface of the controller.   Optionally, the controller would need a VLAN interface in the subnet, as well.

*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.4 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Aruba Central Documentation
Sign up for Security Alerts
Aruba Technical Webinars
Search Airheads
Showing results for 
Search instead for 
Did you mean: