I am setting up an office and need to create two SSID's, one for Corp use, and one for NotCorp use. The Corp SSID is the native VLAN 1 and works fine. The NotCorp SSID should only attach to VLAN 5 which is direct;y connected to a dedicated Firewall Port which is natted to the Internet. In other words, VLAN 1 is all Internal Corp use, and NotCorp is for devices that have no business being on the Corp LAN but need Internet access. I have both VLANs setup and tagged to the controller primary interface and I can ping both the Corp firewall port and the NotCorp Firewall port. VLAN 1 works fine of course, but if I set VLAN 5 for the NotCorp VAP then it disappears and is not wireless accessible. I think I need to bridge but i am still unsure of just how to set this so that NotCorp only communicates through VLAN 5. thanks for any assistance. I have researched this until my eyes are red, but if I missed a previous thread that already discussed this scenario, please let me know. Thanks. BTW The AP's are hardwired to the Controller and I just discovered that it doesn't look like I can set multiple VLANs on the Ports and I suspect this is where I am failing. I tried Trunk and Access but I can't find a way to set VLAN 1 --> VLAN 1 only and VLAN 5 ---> VLAN 5 only from thier respective SSID's. Setting both SSID's to VLAN 1 is easy but not what I need.