Wireless Access

Reply
Occasional Contributor II

VRRP issue between master and standby

VRRP and master-redundancy configured correctly.

Controllers are not pingable.

controllers are connected to switch and from switch both of the controllers are pingable.

No configurations send between master and standby, since there is no connectivity.


Accepted Solutions
Highlighted
Guru Elite

Re: VRRP issue between master and standby

This is your third post in the last few minutes.  I would contact HPE/Aruba Techical Support so that they can walk you through your issues here:  http://www.arubanetworks.com/support-services/support-program/contact-support


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Aruba Central Documentation
ArubaOS Consolidated Release Notes
Aruba Technical Webinars

View solution in original post


All Replies
Highlighted
Guru Elite

Re: VRRP issue between master and standby

This is your third post in the last few minutes.  I would contact HPE/Aruba Techical Support so that they can walk you through your issues here:  http://www.arubanetworks.com/support-services/support-program/contact-support


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Aruba Central Documentation
ArubaOS Consolidated Release Notes
Aruba Technical Webinars

View solution in original post

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: