I will be going to deploy two controller in active/standby mode by using VRRP feature. IAP's model 215 total number of APs are 75.
VLAN-1 subnet on both controllers are 10.10.10.0/24 and VRRP instance is created for vlan-1
My first question - When I do convert the iap's into campus ap's, Do I need to configure the vrrp virtual IP of vlan-1 in IAP conversion process ? So in any case if the master controller would be down, all APs be shifted to standby controller by the help of virtual IP. Am I going right ?
Second Question - Do I need to assign the VRRP virtual IP under the AP system profile in the LMS IP portion for both controllers ? ELSE do not required this step ?