Wireless Access

Reply
Highlighted
New Contributor

Virtual MM and ports/VLAN GUI display issue

MC-Configuration-Interfaces-VLANs(tab)MC-Configuration-Interfaces-VLANs(tab)MC-Configuration-Interfaces-Ports(tab)MC-Configuration-Interfaces-Ports(tab)Hi all,

I am facing an issue in the display of VLANs and Ports within the MM's GUI interfaces.

As shown:

In the ports (tab): GE0/0/0 is displayed as configured trunk port & native vlan 300

While in the VLANs (tab): GE0/0/0 is NOT a member of any VLAN ???

 

Is this an issue? or if this is normal, what is the logic behind this???

 

Thanks/Shady

Highlighted

Re: Virtual MM and ports/VLAN GUI display issue


@Shady.Hassan wrote:

Hi all,

I am facing an issue in the display of VLANs and Ports within the MM's GUI interfaces.

As shown:

In the ports (tab): GE0/0/0 is displayed as configured trunk port & native vlan 300

While in the VLANs (tab): GE0/0/0 is NOT a member of any VLAN ???

 

Is this an issue? or if this is normal, what is the logic behind this???


Historically, under VLANs, only access ports are listed since they are associated with a single VLAN. Trunk ports have not been listed.


Charlie Clemmer
Aruba Customer Engineering
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: