Wireless Access

Reply
Highlighted
All-Decade MVP 2020

Visual Rf plan.

Hi guys! :smileyhappy:

 

i have a simple question, i have doing a simulation with viasual RF plan, when i want see the heat map, for the coverage of the ap, i see three colors, red green and light blue.

now, the areas that have the light blue color, are areas good ?
what is the speed in these areas?
are these areas acceptable?

 

notes.

 

i use rf Plan version 7.4.0
and the access points are the 105 AP.
i use both radio frequencies 2.4 and 5 ghz.

 

thanks.

 

Bye andrea.

 

Andrea

Accepted Solutions
Frequent Contributor II

Re: Visual Rf plan.

The red orange and green indicate signal strength of -45, -55 and -65 and should give you connectivity. The blue is -75 and won't give you very good signal as indicated by the signal strength mentioned above.

View solution in original post


All Replies
Frequent Contributor II

Re: Visual Rf plan.

The red orange and green indicate signal strength of -45, -55 and -65 and should give you connectivity. The blue is -75 and won't give you very good signal as indicated by the signal strength mentioned above.

View solution in original post

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: