Wireless Access

last person joined: 11 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

VisualRF Heatmap overlay problem

This thread has been viewed 0 times

  • 1.  VisualRF Heatmap overlay problem

    Posted Mar 06, 2012 03:19 PM

    When adding 'planned' devices to a map, I seem to be having a problem with the heatmap function.  After placing an AP on the map, saving, and refreshing, the page the heatmap 'blooms' are not appearing as they should.  I've attached an image.  On other maps (for other floors), the 'heatmap' function is working normally (see image #2).

     

     

    thoughts?

     

     

    heatmap problem

     

    heatmap_image_2.png



  • 2.  RE: VisualRF Heatmap overlay problem

    Posted Mar 06, 2012 03:53 PM

    I've had that happen before.

     

    I was able to get them back by selecting Speed, the re-selecting heatmap



  • 3.  RE: VisualRF Heatmap overlay problem

    Posted Mar 06, 2012 04:02 PM

    Selecting 'Speed' gave me the following, which is closer to what I'd expect as 'normal' but still significantly reduced in size. 

    speed.png

     

    back to 'heatmap' yields the original result.

     

    Also, as I was typing the above it occurred to me the measurement of the plan might have been incorrect, resulting in an out-of-scale situation causing this, and so I've just reconfirmed the measurement of the plan/scale is indeed correct.