Hi, I have a problem with visualrf not starting or i should say not responding. It is enabled and the system->status tab says the engine is "OK". If you go to the Visualrf->floorplans tab it responds:
"VisualRF engine is not currently running. It may be disabled. Enable it on the Visual Setup page. The engine may take a few minutes to start after it is enabled."
At the end of /var/log/visualrf there is the following:
2012-03-27 13:44:40,031 WARN Main com.airwave.svg.init.Startup waiting for the AuthorizationService to bootstrap
any ideas as to what AuthorizationService i should be looking at?
thx