Hi,
I was just wondering about using using two different vlans on a VAP but clients connecting with a static ip?
There are a number of printers that should have a static ip, but then with the vlan pool, they may end up in the wrong vlan. Is there a way to put these particular clients into the correct vlan according to the static ip they have been configured with?
I'm assuming this will be a user derivation rule that gets applied to the aaa profile and will be something like....
aaa derivation-rules user "test-rule" set vlan condition macaddr starts-with "00:19:70" set-value x
Are there any other caveats I should be aware of.
Regards