Wireless Access

Reply
New Contributor

Vlan pooling

Hi, can someone please tell me how to configure the vlan pooling. I have one controller acting as a default gateway and four switches connected to the controller. The plan is to configure one ssid for over 1000 users
Guru Elite

Re: Vlan pooling

The basic definition of VLAN pooling is to:

 

- Define two or more user VLANs within the controller

- Put two or more of those VLANs into the Virtual AP parameter so that users are load balanced into those VLANs.

 

There is nothing more to it than that.


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos

Re: Vlan pooling

Joshua,

 

Please check this Validated Reference Design document about the possibilities of using a single VLAN instead of VLAN pooling: http://community.arubanetworks.com/t5/Validated-Reference-Design/Single-VLAN-Architecture-for-WLAN/ta-p/257196

 

In many cases VLAN pooling is the less desirable solution.

 

Herman

--
If you have urgent issues, please contact your Aruba partner or Aruba TAC (click for contact details).
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: