Wireless Access

Hi

We have tan customer with Aruba7210 in master-standby mode.
Now, both WLCs are in Master mode in excep 2 VLAN's.
Now, I need Your help - how can I debug  and set logging related to VRRP issues in CLI?
I've read some discussion and find out that people use command like
logging level debugging network process vrrpd
- this is not working so I assume 6.5 does not support it?

What is the right CLI command to activate vrrp issue debugging?

Thanks

Juha-Pekka

Are the two controllers part of the same VLAN? If not you wont get VRRP to work. VRRP requires that the interfaces you're trying to run VRRP over exist in the same L2 Broadcast Domain.

Hi

yes L2 is ik and they can also  ping so L3 and works as well

mac adresses of each wlc are know on both hosts and switches they are connected on. 
strange issue i’ve not seen before

L2 exist in one Core switch nexus 5k but are connected on different extenders

br

juha-pekka

This post should give an some idea in what commands to use for debugging vrrp.

https://community.arubanetworks.com/t5/Controller-Based-WLANs/What-are-all-the-debugging-and-troubleshooting-commands-that-we/ta-p/237761

Could you share the output of show vrrp <id> statistics as well for the problematic vrrp.