Wireless Access

Reply
Frequent Contributor II

Wall identification with VisualRF

Have looked in both offline and online versions of VisualRF...

 
In either version, is there a method to automate the delineation of walls?
 
This seems like it should be possible.
 
Unfortunately, whenever we receive blueprint updates, we just receive PDFs. (Not rasterized PDFs btw)
 
It seems like Aruba gears VRF to work with CAD/DMG files.
 
Can anyone confirm that with CAD or DMGs, the wall material specifying doesn't have to be done over and over?
 
 
 
Guru Elite

Re: Wall identification with VisualRF

Unfortunately, there is not a way to automatically detect walls.  They have to be drawn on all diagrams.


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Frequent Contributor II

Re: Wall identification with VisualRF

Thank you Colin... can you confirm that to be the case for CAD / DMG files as well?

Guru Elite

Re: Wall identification with VisualRF

the.sleeper

 

It is the same with CAD drawings, as well.


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: