Wireless Access

Reply
Highlighted

Warning when trying to change some features on ARM

Warning: If there is an entry for a radio in 'ap spectrum local-override' profile on the local controller that terminates the AP, that entry will override the mode selection in the radio profile.

 

Im getting this warning everytime i try to change something like:  Use 802.11h 802.11d on 802.11g and 802.11a

 

Whats that? someone can explain in to me? maybe im just not getting it because limited english understanding.

 

Thanks

----------------------------------------------------
Project engineer

Accepted Solutions
Highlighted
Super Contributor II

Re: Warning when trying to change some features on ARM

Its just warning you that the change will not effect an AP if it has AP specific configuration. The AP specific configuration will be used over the ap-group config.

Dustin Burns
Senior Mobility and Access Engineer @WEI
ACMX #509 | ACCX #1272 | ACSA | ACDA | ACEA | CCNP | CCDP | CCNA Wireless

If my post address your queries, give kudos and accept as solution!

View solution in original post


All Replies
Highlighted
Super Contributor II

Re: Warning when trying to change some features on ARM

Its just warning you that the change will not effect an AP if it has AP specific configuration. The AP specific configuration will be used over the ap-group config.

Dustin Burns
Senior Mobility and Access Engineer @WEI
ACMX #509 | ACCX #1272 | ACSA | ACDA | ACEA | CCNP | CCDP | CCNA Wireless

If my post address your queries, give kudos and accept as solution!

View solution in original post

Highlighted
MVP Expert
MVP Expert

Re: Warning when trying to change some features on ARM

Its just an informational message you don't have any spectrum override configured. You can ignore it.

Kind Regards Marcel Koedijk
HPE ASE Flexnetwork | ACMP | ACCP | Ekahau ECSE Design - Was this post usefull, Kudos are welcome.
Highlighted

Re: Warning when trying to change some features on ARM

Thank you 2

----------------------------------------------------
Project engineer
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: