Wireless Access

last person joined: 18 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

We have a 225 AP and the radio quality bounces from good to poor

This thread has been viewed 0 times

  • 1.  We have a 225 AP and the radio quality bounces from good to poor

    Posted Feb 13, 2017 03:25 PM

    We have some clients at a location that will intermittently get dropped from the wireless network and at the same time the SSID that they were associated to will not be visable on their wireless settings.  In the controller I am seeing the Radio Quality bounce from good to poor for this particular AP.  It is a 225 and we are running  6.4.2.12.  Any thoughts as to what may be causing the Radio Quality to bounce?



  • 2.  RE: We have a 225 AP and the radio quality bounces from good to poor

    EMPLOYEE
    Posted Feb 13, 2017 03:27 PM

    Interference?  What is the Channel Utilization on that AP?  Also, what is the band is this occurring on?



  • 3.  RE: We have a 225 AP and the radio quality bounces from good to poor

    Posted Feb 13, 2017 05:03 PM

    Hi Colin,

    Thanks for your reply.  It seems to be happening on both 2.4 and 5ghz.  At the time of the "poor" quality I was seeing the channel utilization above 55%.



  • 4.  RE: We have a 225 AP and the radio quality bounces from good to poor

    Posted Feb 14, 2017 02:55 AM

    You can try to focus on one user check the SNR rating, this could be  interference.