04-21-2016 01:38 AM
I´m implementing "device-group" configuration in the Aruba switches and noticed that while an AP225 is detected without issues, and AP125 isn´t. In the user guide for the switch I can read this:
"In this release, the Mobility Access Switch provides support only for the device-type and Aruba APs that support Aruba's proprietary LLDP TLV."
So then my question arises, what AP models are not supported? I can´t seem to find this value in datasheets or feature matrix.
Aruba Partner Ambassador
Aruba: ACMX #537 ACCP | CWNP: CWNA CWDP CWSP CWAP
Solved! Go to Solution.
04-23-2016 02:30 AM
I would say any 802.11n access point newer than the AP-125. The AP-125 is older and did not have enough memory to run the LLDP daemon. You should also not expect it in the AP92/93, which is also older, but does not have enough memory.
*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.3 User Guide
InstantOS 8.3 User Guide
Airheads Learning Videos