Wireless Access

last person joined: yesterday 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

Why 'I' Flag appears in ap database when the AP is terminating on the Local in a Master-Local Setup

This thread has been viewed 6 times

  • 1.  Why 'I' Flag appears in ap database when the AP is terminating on the Local in a Master-Local Setup

    Posted Sep 24, 2015 11:26 AM

    Hi,

     

    I have a Master-Local Setup . And I need the AP to terminate on the Local Controller and so am Provinding the LMS as the local controller and Backup LMS as the Master Controller. When I bring up the AP, in Show AP database command the 'I' flag is set when am viewing from the Local Controller but when am viewing from Master Controller , no flags are set. What could be the reason for this ??



  • 2.  RE: Why 'I' Flag appears in ap database when the AP is terminating on the Local in a Master-Local Setup
    Best Answer

    EMPLOYEE
    Posted Sep 24, 2015 11:30 AM

    Probably because the Virtual AP the AP is in is referencing a VLAN that does not exist on your local controller.  Vlans have to be created locally on each controller and are not synched with the global config.



  • 3.  RE: Why 'I' Flag appears in ap database when the AP is terminating on the Local in a Master-Local Setup

    Posted Jan 02, 2019 10:19 AM

    Thank you Joseph, you saved my day !