Wireless Access

last person joined: 9 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

Why can't find Multi Association on Virtual AP profile at 6.1.3.4

This thread has been viewed 1 times

  • 1.  Why can't find Multi Association on Virtual AP profile at 6.1.3.4

    Posted Oct 24, 2012 11:41 PM
      |   view attached

    Why can't find the Multi Association on Virtual AP profile at version of 6.1.3.4? I have attach the screen capture.

    Attachment(s)

    docx
    Aruba Multi Association.docx   62 KB 1 version


  • 2.  RE: Why can't find Multi Association on Virtual AP profile at 6.1.3.4

    EMPLOYEE
    Posted Oct 25, 2012 12:14 AM

    It was removed in 6.1.3.2



  • 3.  RE: Why can't find Multi Association on Virtual AP profile at 6.1.3.4

    Posted Oct 25, 2012 09:22 AM

    On 6.1.3.4 have any other method to improve mobile client (such as laptop, tablet or smartphone) roaming experience, beside adjust the roaming aggresiveness on the laptop?



  • 4.  RE: Why can't find Multi Association on Virtual AP profile at 6.1.3.4

    Posted Oct 25, 2012 10:23 PM

    Roaming decisions can me influenced by having a good RF design  with a sufficient amount of overlap between coverage cells. As a client moves towards the edge of its current AP's cell, there's a good chance the signal would fall below the clients threshold that would trigger it to seek out a new AP. With a good amount of overlap, the "next" AP's cell signal would be fairly strong, thus making it an obvious choice for roaming.