Wireless Access

Reply
Occasional Contributor II

Wifi client unable to ping it's default gateway, and WLC can not ping User-Vlan Gateway

WLC is Aruba 7205 and APs are 305 ,, VRRP is configured and working fine, Wifi Cleints are getting IP address from vlan-24 as designed ...but clients can not access netwokrk ,even can not ping their gateway which is vlan-24 ( 10.50.27.254) 

 

any suggessions please 

 

 

re,

Anvar

Re: Wifi client unable to ping it's default gateway, and WLC can not ping User-Vlan Gateway

What role do the authenticated clients get?

Have you allowed traffic in that role?



- - - - Aruba ACCX #748, ACDX #758, ACMP, ACEAP | HPE Master ASE - - - -
- - - - - - - Feel free to give kudos or accept as a solution! - - - - - - - - -
Occasional Contributor II

Re: Wifi client unable to ping it's default gateway, and WLC can not ping User-Vlan Gateway

the Role assigned is "authenticated" 

 

Have you allowed traffic in that role?  

  Its a new installation ,, so by default the traffic have to be allowed ,, am i right ?

 

 

re,

Anvar

Highlighted
MVP Guru

Re: Wifi client unable to ping it's default gateway, and WLC can not ping User-Vlan Gateway

If you don't have the basics working, it is really hard to help you in this forum with limited information. It's probably something simple, and if you work with your partner or Aruba Support it is probably much faster to get to a solution and working configuration.

 

From what I have seen in your different posts it can be the uplink configuration from the controller, the port and VLAN trusts, LACP, to start with. With access to the system for your partner or Support, it is probably easy to run the relevant commands to find and solve the issue.

--
If you have urgent issues, please contact your Aruba partner or Aruba TAC (click for contact details).
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: