Wireless Access

Reply
Highlighted
Contributor I

Re: Windows 7/10 AD Joined issues

@cjoseph

I tried removing the VLAN pool from the user role and letting the VAP assign the VLAN pool and that did not make a difference in the behavior.

 

One thing to note, this is a Hidden SSID.  Not sure if that makes a difference.

Phillip Kluttz
Network Engineer University of North Carolina at Greensboro
Highlighted
Guru Elite

Re: Windows 7/10 AD Joined issues

A hidden SSID should not make a difference if worked before.

 

I would:

 

- Have the computer sit at the ctrl-alt-delete screen and ensure it passed machine authentication

- Type "show datapath session table <ip address of laptop>" every few seconds to ensure that no traffic is being blocked or treated incorrectly.

- Login to the laptop and run the same command above to see what the laptop is attempting to do while you are logging in.

 

Alternatively, I would start a device pcap on the controller and analyze the flow of traffic in wireshark to see during bootup and login what could be happening:

https://community.arubanetworks.com/t5/Controller-Based-WLANs/HOW-TO-DO-DATAPATH-PACKET-CAPTURE-FOR-WIRELESS-CLIENT-FROM/ta-p/179940

 


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Aruba Central Documentation
ArubaOS Consolidated Release Notes
Aruba Technical Webinars
Highlighted
Contributor I

Re: Windows 7/10 AD Joined issues

I had a session yesterday with Aruba ERT about this issue.  He took captures and looked at the show datapath session, auth tracebuf and a number of other things.  Hes going to look those over and get back with me.

 

 

 

Phillip Kluttz
Network Engineer University of North Carolina at Greensboro
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: