Wireless Access

Reply
Highlighted
Occasional Contributor I

Re: Wireless Speed

client is near to the AP and on the wireless ststus it is displaying 54 mbps.......

Highlighted
Guru Elite

Re: Wireless Speed

The wireless status where?  Windows?  That has errors quite a few times.  The controller says your client is associated at 802.11n.


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Remote Access Point Solution Guide
ArubaOS Consolidated Release Notes
ArubaOS 8 ViA VPN Solution Guide
Highlighted
Valued Contributor I

Re: Wireless Speed

Have you run any performance/throughput test on your client device? This could be just the OS mis-reading the NIC or a graphical issue only. Try iperf or jperf. Those are good for telling. If it is only running a lower rate, try updating the NIC driver if it's old.

 

Kudos appreciated, but I'm not hunting! (ACMX 104)
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: