Wireless Access

Reply
Highlighted
Occasional Contributor I

Zero Touch Provisioning (ZTP) help

Can you turn off the ZTP capabilities of a 303h access point by connecting to the SetMeUp SSID and aruba instant? I have a 303h access point that I have been trying to set up for my house and it constantly reboots when I connect to internet, but it sets up fine if it is not connected to the internet. I was told that ZTP may be to blame. 

Guru Elite

Re: Zero Touch Provisioning (ZTP) help

You cannot turn it off, even if you reset the AP.  You would have to contact support: https://www.arubanetworks.com/support-services/contact-support/


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.4 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Aruba Central Documentation
Sign up for Security Alerts
Aruba Technical Webinars
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: