Wireless Access

Reply
Occasional Contributor II

Re: addition failed as max limit has been reached - but why?

yes, found it! thank you very much

Occasional Contributor II

Re: addition failed as max limit has been reached - but why?

Hello again,

 

can there occur some problems with the virtual maschine? Just shutdown, change specs and restart? Because it is a linux-system it could be critical no?

 

Thanks in advance,

raffael

Guru Elite

Re: addition failed as max limit has been reached - but why?

That is all that you need to do.  There should not be a problem with changing the specifications as long as your hardware supports it.


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.4 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Aruba Central Documentation
Sign up for Security Alerts
Aruba Technical Webinars
Guru Elite

Re: addition failed as max limit has been reached - but why?

To be clear, shut down the VM, change the memory and processor to what is in the document.  When you restart the VM, look at the console messages while it is booting up to monitor the status of the VM.


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.4 User Guide
InstantOS 8.3 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Aruba Central Documentation
Sign up for Security Alerts
Aruba Technical Webinars
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: