Wireless Access

last person joined: 13 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

ap-105 signal

This thread has been viewed 0 times

  • 1.  ap-105 signal

    Posted Jan 13, 2012 01:33 PM

    Greetings;

      I have a wireless ap105 and have a clients complaining about the connectivity.    I went over and ran isSSIDer to see the signal and when I did a time graph and it looks like a persons erratic heartbeat on a ERG machine.   (in about 1 minute you see the signal strength jump from -10 to -53. (it'll do this about 30 - 40 times per minute)   The laptop is not moving nor is the access point in the ceiling (LOL)    Other places the signal strength fluctuates a bit not like this.

     

    This isnt just one access point, its about 6 of them.       

     

    Any ideas?  HELP! 



  • 2.  RE: ap-105 signal

    Posted Jan 13, 2012 01:37 PM

    What code is running on your controller?

     

    Also, check the following command to see if the AP-105 is actually changing power levels:

     

    show ap arm history ap-name xxxx (where xxxx is one of the APs that you are seeing fluctuate).

     

    Do you see power/channel changes happening often?