Wireless Access

I have a bunch of aruba 93's 105's 92's, and a few controllers.

I have one particular AP93 that is having an issue. It is not coming up in my aruba-master. I went on the serial consolse and reset it (running purge, save, reset).

Now it does the login screen with a repeating message saying "turn off mobility".

I can not log into via serial or the web interface using admin/admin.

This is the only AP thats doing it from a batch of AP93's that all reset fine and came up on my controller. Any help?

Does the regulatory of the IAP-93 and the mobility controller match?

it is not an IAP and I'm  not sure what you're talking about with the "regulatory"

The only instance I know if that message is an IAP that was converted to a campus AP that does not match the regulatory domain of the target controller.  If you want, you can open a case with TAC to determine what could be going on here.

Or did someone try to convert this AP-93 to a IAP-93. I remember showing this behavior when someone tried this not successful conversion.

Can you also erase the image in the AP and then reboot it?

Clear os


community.arubanetworks.com/t5/Wireless-Access/Tutorial-AP-Boot-Commands/td-p/91734

Hey there!

 

I saw this solution in another thread but they neglected the space between the words and it didn't work. Thanks  a million :)

How do you solve it, please?

It should pull a firmware image from the controller then