Wireless Access

last person joined: 17 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

aruba controller in Master-local setup

This thread has been viewed 0 times

  • 1.  aruba controller in Master-local setup

    Posted Nov 11, 2013 09:27 AM

    Is there anyway to force all AP to move to Local controller without rebooting master controller?  I had all AP on local controller but we lost connectivity to local made all ap report to master.

    Thank you

     



  • 2.  RE: aruba controller in Master-local setup

    EMPLOYEE
    Posted Nov 11, 2013 09:30 AM
    Are you using VRRP or LMS?



    - You can turn on VRRP preemption in the VRRP settings.

    - You can turn on LMS preemption in the AP system profile.


  • 3.  RE: aruba controller in Master-local setup

    Posted Nov 11, 2013 09:35 AM

    I am using LMS.

    I just turned on LMS preemption.



  • 4.  RE: aruba controller in Master-local setup

    EMPLOYEE
    Posted Nov 11, 2013 09:39 AM

    Since it was turned on after the failover event, you may have to swap the LMS and Backup LMS IPs to trigger the failover, then switch them back.



  • 5.  RE: aruba controller in Master-local setup

    Posted Nov 11, 2013 09:42 AM

    worked.

    Thank you