Wireless Access

last person joined: yesterday 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

campus controller locate tab under security

This thread has been viewed 0 times

  • 1.  campus controller locate tab under security

    Posted Jul 05, 2017 10:38 AM

    I have a 7000 series controller running 6.5.1.4 and I click on the security tab and it lists out discovered AP's and such.   so I select one of the "AP's" in the interfering section and then click on the locate button.  I get the pop up but it says there are no matches.   I know it is in my building as it is one in my lab so something should show up there.  do I have to turn something on to get them to show up?



  • 2.  RE: campus controller locate tab under security

    EMPLOYEE
    Posted Jul 05, 2017 12:35 PM

    That button probably should be removed.  Before ArubaOS 6.3, there was an RF Plan that was hosted on the controller the locate button would locate assets like clients and APs on that Rf plan.  Since RF Plan was removed from ArubaOS 6.3 and beyond, that button is no longer relevant.



  • 3.  RE: campus controller locate tab under security

    Posted Jul 05, 2017 02:56 PM
    So I looked in airwave as well and it is not showing up on the map there either. Running airwave 8.2.3.

    Regards,
    Dave

    MGTS, CCIE #3272
    Enterprise Network Technical Support
    Texas Instruments Inc.
    Off. 214-567-1212
    Cell. 214-478-6258


  • 4.  RE: campus controller locate tab under security

    EMPLOYEE
    Posted Jul 05, 2017 03:00 PM

    There is no replacement for the "locate" button in AOS.