Wireless Access

Reply
Contributor I

cannot connect to this network , windows 10

Hiii to all 

 

greeting of day 

 

we currently have deployment for aruba controller 7010 , We done intgeration with Microsoft Radius server for dot1x authentication but when we try to connect to this SSID we get this error " Cannot connect to this network the client doesnt match network requirment " how we can solve this problem , i heard that it require certificate , but i dont know how to configure this method of authentication 

 

best regards, 

 

Highlighted
MVP Guru

Re: cannot connect to this network , windows 10

What have you configured for your NPS policy? Your client and RADIUS policies will need to match. In default cases the Aruba controller will merely pass the EAP conversation through to the back end RADIUS server (unless EAP termination is enabled). You will need to add the Aruba controller as a NAS Client on your NPS server.


ACMP, ACSA, ACDX #985
If my post addresses your query, give kudos:)
Contributor I

Re: cannot connect to this network , windows 10

Dear Zialon 

 

Thanks For your replay , kindly note that this is multinational company , i dont have a control for radius server , as customer say they add controller as NAS Device 

 

Best regards,  

MVP Guru

Re: cannot connect to this network , windows 10

You will need to speak to the team to ensure they have configured the RADIUS policies correctly along with the client. In the mean time you can check if the RADIUS is responding to requests with the following:

 

#aaa test-server mschapv2 [RADIUS-SERVER] [USERNAME] [PASSWORD]

You can also view the EAP conversation between the client and RADIUS server.

 

#show auth-tracebuf

ACMP, ACSA, ACDX #985
If my post addresses your query, give kudos:)
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: