Hi,
we have a 7210 controller where currently 1 port channel is configured with 2 x 10 Gbit fibre interfaces. We want to change that into 2 x 1 GBit utp interfaces.
Mixing interfaces of different speed is not supported. So i thought of retrieving the config, modify, return the new config, and boot from it...
Unfortunately, after booting from the new config, the network is no longer working. And i do not see any error. When executing 'show running' the command seems to hang...
We just moved the lines :
lacp timeout short
lacp group 1 mode active
from interfaces 2 and 3 to interfaces 0 and 1, which should be sufficiant.
interface gigabitethernet 0/0/0
description "GE0/0/0"
trusted
trusted vlan 1-4094
!
interface gigabitethernet 0/0/1
description "GE0/0/1"
trusted
trusted vlan 1-4094
!
interface gigabitethernet 0/0/2
description "GE0/0/2"
trusted
trusted vlan 1-4094
lacp timeout short
lacp group 1 mode active
!
interface gigabitethernet 0/0/3
description "GE0/0/3"
trusted
trusted vlan 1-4094
lacp timeout short
lacp group 1 mode active
Anyone having an idea?
#7210