Wireless Access

Reply
Contributor I

controller active APs number didn't match in use APs'

Hi everyone,

 

We have a license problem here.

What I can see is 119 APs online ,It suppose to consume 119 licenses

(AC01) #show ap database-summary

AP Database Summary
-------------------
AP Mode Total Up Total Down Total Upgrading* Total Rebooting* RAP Up RAP Down RAP Upgrading* RAP Rebooting* Active Up Standby Up
------- -------- ---------- ---------------- ---------------- ------ -------- -------------- -------------- --------- ----------
Access Points 119 5 0 0 0 0 0 0 118 1
Air Monitors 0 0 0 0 0 0 0 0 0 0
Wired Access Points 0 0 0 0 0 0 0 0 0 0
Mesh Portals 0 0 0 0 0 0 0 0 0 0
Mesh Points 0 0 0 0 0 0 0 0 0 0
Spectrum Monitors 0 0 0 0 0 0 0 0 0 0

 

 

 

(AC01) #show license-usage ap

AP Licenses
-----------
Type Number
---- ------
AP Licenses 128
PEF Licenses 128
Overall AP License Limit 128

AP Usage
--------
Type Count
---- -----
Active CAPs 126
Standby CAPs 0
RAPs 0
Remote-node APs 0
Tunneled nodes 0
Total APs 126

Remaining AP Capacity
---------------------
Type Number
---- ------
CAPs 2
RAPs 2

 

But It consume 126 licenses actually. What would cause this ?

What I saw last month it is consume 120 licenses,

But it is up to 126 yesterday when I saw..

I didn't understand....

 

(AC01) #show license-usage ap

AP Licenses
-----------
Type Number
---- ------
AP Licenses 128
PEF Licenses 128
Overall AP License Limit 128

AP Usage
--------
Type Count
---- -----
Active CAPs 120
Standby CAPs 0
RAPs 0
Remote-node APs 0
Tunneled nodes 0
Total APs 120

Remaining AP Capacity
---------------------
Type Number
---- ------
CAPs 8
RAPs 8

 

(AC01) #show version
Aruba Operating System Software.
ArubaOS (MODEL: Aruba3600), Version 6.4.3.7

 

Can someone please assist in directing me in the correct direction.

Thank you for any answers

 

MVP Guru

Re: controller active APs number didn't match in use APs'

Could it be that you have multiple controllers and centralized licensing enabled?

 

You can check with: 'show license aggregate'.

 

Some of your licenses could be used on another controller in the licensing cluster.

--
If you have urgent issues, please contact your Aruba partner or Aruba TAC (click for contact details).
Contributor I

Re: controller active APs number didn't match in use APs'

Thank you for your reply

 

(AC01) #show license aggregate

Aggregate License Table
-----------------------
Hostname IP Address AP PEF RF Protect xSec Module ACR Last update (secs. ago)
-------- ---------- --- --- ---------- ----------- --- -----------------------
AC02 10.80.99.232 0 0 0 0 0 9
AC01 10.80.99.231 128 128 0 0 0 11

Total AP License Count :128
Total PEF License Count :128
Total RF Protect License Count :0
Total XSEC License Count :0
Total ACR License Count :0

 

I couldn't see any other controller use the licenses...

MVP Guru

Re: controller active APs number didn't match in use APs'

Please work with Aruba TAC, as I don't see anything strange.

--
If you have urgent issues, please contact your Aruba partner or Aruba TAC (click for contact details).
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: