Wireless Access

Hi everyone,

I use command "show license-usage ap" and I found that 126 APs in use,But I use GUI and I found only 119 in use.

What would cause this ?And How many AP left can I add actually?

(AC01) #show license-usage ap

AP Licenses
-----------
Type Number
---- ------
AP Licenses 128
PEF Licenses 128
Overall AP License Limit 128

AP Usage
--------
Type Count
---- -----
Active CAPs 126
Standby CAPs 0
RAPs 0
Remote-node APs 0
Tunneled nodes 0
Total APs 126

Remaining AP Capacity
---------------------
Type Number
---- ------
CAPs 2
RAPs 2

(AC02) #show license-usage ap

AP Licenses
-----------
Type Number
---- ------
AP Licenses 2
PEF Licenses 2
Overall AP License Limit 2

AP Usage
--------
Type Count
---- -----
Active CAPs 0
Standby CAPs 119
RAPs 0
Remote-node APs 0
Tunneled nodes 0
Total APs 119

Remaining AP Capacity
---------------------
Type Number
---- ------
CAPs 0
RAPs 0

What is the firmware version? The information on the cli is correct information. show ap active After running the show ap database command Check the amount of AP actually connected Looks like GUI display error

Thank you for your reply

(AC01) #show version
Aruba Operating System Software.
ArubaOS (MODEL: Aruba3600), Version 6.4.3.7

show ap active :Num APs:119

show ap database status up:Total APs:119

show license-usage ap  Active CAPs :126

Actually It is 119 APs online