Hi all,
I'm not sure if this is on the right board...please move if necessary.
I have 15 iap-105's and no controller besides the virtual controller. I have client matching turned on. For the most part everything is working really well but I have 2 situations that are similar and need to be addressed.
1) In one classroom I have an AP, a projector that has a wifi connection, and a Dell tablet. The projector and the tablet will not connect to the AP in that room. They will connect to AP's on other floors in the building. If I take my tablet (the same model as the teachers) into that room it will connect to the AP no problem. So do student devices. With the projector and teacher tablet connecting to APs in other parts of the building it makes for very poor performance.
How can I get them on the same AP (preferably the AP in that room) for best performance.? And what logs should I be looking at to troubleshoot this?
2) For the second case I have a phone that is used to scan credit cards and I want to set it up on its own VLAN. The VLAN is not a problem but I only want the wired portion of that VLAN to connect directly to the nearest AP. In other words, I don't want to setup that VLAN on all of my switches. I want a direct path from the AP to the firewall. .
Can I make that VLAN only accessible on a single AP or can I configure the wifi so that phone will only connect to that single AP and then have Internet access for the credit card?