Wireless Access

hi,

I am using Mobility Controller 3200XM.  And AP-125.  I am trying to create SSID in AP using the following commands.  Radio LED doesnot glow on AP-125.

(Aruba3200) (config) #wlan ssid-profile myssidprofile 
(Aruba3200) (SSID Profile "myssidprofile") #essid myessid 
(Aruba3200) (SSID Profile "myssidprofile") #opmode opensystem 
(Aruba3200) (SSID Profile "myssidprofile") #exit

(Aruba3200) (config) #wlan virtual-ap myvirtualap 
(Aruba3200) (Virtual AP profile "myvirtualap") #ssid-profile myssidprofile 
(Aruba3200) (Virtual AP profile "myvirtualap") #vlan 1
(Aruba3200) (Virtual AP profile "myvirtualap") #exit

(Aruba3200) (config) #rf arm-profile myarmprofile
(Aruba3200) (Adaptive Radio Management (ARM) profile "myarmprofile") #assignment disable
(Aruba3200) (Adaptive Radio Management (ARM) profile "myarmprofile") #exit

(Aruba3200) (config) #rf dot11a-radio-profile mydot11aradioprofile
(Aruba3200) (802.11a radio profile "mydot11aradioprofile") #arm-profile myarmprofile
(Aruba3200) (802.11a radio profile "mydot11aradioprofile") #no high-throughput-enable
(Aruba3200) (802.11a radio profile "mydot11aradioprofile") #channel 48

(Aruba3200) (config) #wlan virtual-ap myvirtualap
(Aruba3200) (Virtual AP profile "myvirtualap") #allowed-band a
(Aruba3200) (Virtual AP profile "myvirtualap") #ssid-profile myssidprofile
(Aruba3200) (Virtual AP profile "myvirtualap") #vlan 1

(Aruba3200) (config) #ap-name 6c:f3:7f:ce:60:a2 
(Aruba3200) (AP name "6c:f3:7f:ce:60:a2") #virtual-ap myvirtualap 
(Aruba3200) (AP name "6c:f3:7f:ce:60:a2") #dot11a-radio-profile mydot11aradioprofile 

Please tell if I missed out something. 

Thanks in advance.

-uv.

Type "show ap database" to see if there is a flag next to that access point, or if it even shows up.

hi,

This is what I got. It detects AP.

(Aruba3200) #show ap database

AP Database
-----------
Name               Group    AP Type  IP Address     Status  Flags  Switch IP
 Standby IP
----               -----    -------  ----------     ------  -----  ---------
 ----------
6c:f3:7f:c7:4f:72  default  125      192.168.10.36  Down           192.168.10.1
 0.0.0.0

Flags: U = Unprovisioned; N = Duplicate name; G = No such group; L = Unlicensed
       I = Inactive; D = Dirty or no config; E = Regulatory Domain Mismatch
       X = Maintenance Mode; P = PPPoE AP; B = Built-in AP
       R = Remote AP; R- = Remote AP requires Auth; C = Cellular RAP;
       c = CERT-based RAP; 1 = 802.1x authenticated AP; 2 = Using IKE version 2
       u = Custom-Cert RAP; S = Standby-mode AP; J = USB cert at AP
       M = Mesh node; Y = Mesh Recovery

Total APs:1

Thanks

uv.

Type "show  log system 50" to see if there is any information about that AP.

For now, your AP is not on that controller...

hi joseph,

I could see some license related stuff.

Mar 14 11:17:47 :311002:  <WARN> |AP 6c:f3:7f:c7:4f:72@192.168.10.36 sapd|  Rebo
oting: SAPD: Reboot requested by controller
Mar 14 11:17:48 :303086:  <ERRS> |AP 6c:f3:7f:c7:4f:72@192.168.10.36 nanny| Proc
ess Manager (nanny) shutting down - AP will reboot!
Mar 14 11:18:32 :303022:  <WARN> |AP 6c:f3:7f:c7:4f:72@192.168.10.36 nanny|  Reb
oot Reason: AP rebooted Mon Mar 14 11:17:48 PST 2016; SAPD: Reboot requested by
controller
Mar 14 11:18:54 :305038:  <WARN> |stm|  No available license for AP 6c:f3:7f:c7:
4f:72
Mar 14 11:27:48 :311002:  <WARN> |AP 6c:f3:7f:c7:4f:72@192.168.10.36 sapd|  Rebo
oting: SAPD: Reboot requested by controller
Mar 14 11:27:48 :303086:  <ERRS> |AP 6c:f3:7f:c7:4f:72@192.168.10.36 nanny| Proc
ess Manager (nanny) shutting down - AP will reboot!
Mar 14 11:28:32 :303022:  <WARN> |AP 6c:f3:7f:c7:4f:72@192.168.10.36 nanny|  Reb
oot Reason: AP rebooted Mon Mar 14 11:27:49 PST 2016; SAPD: Reboot requested by
controller
Mar 14 11:28:54 :305038:  <WARN> |stm|  No available license for AP 6c:f3:7f:c7:
4f:72
Mar 14 11:37:55 :311002:  <WARN> |AP 6c:f3:7f:c7:4f:72@192.168.10.36 sapd|  Rebo
oting: SAPD: Reboot requested by controller
Mar 14 11:37:56 :303086:  <ERRS> |AP 6c:f3:7f:c7:4f:72@192.168.10.36 nanny| Proc
ess Manager (nanny) shutting down - AP will reboot!
Mar 14 11:38:39 :303022:  <WARN> |AP 6c:f3:7f:c7:4f:72@192.168.10.36 nanny|  Reb
oot Reason: AP rebooted Mon Mar 14 11:37:56 PST 2016; SAPD: Reboot requested by
controller
Mar 14 11:39:01 :305038:  <WARN> |stm|  No available license for AP 6c:f3:7f:c7:
4f:72
Mar 14 11:47:55 :311002:  <WARN> |AP 6c:f3:7f:c7:4f:72@192.168.10.36 sapd|  Rebo
oting: SAPD: Reboot requested by controller
Mar 14 11:47:56 :303086:  <ERRS> |AP 6c:f3:7f:c7:4f:72@192.168.10.36 nanny| Proc
ess Manager (nanny) shutting down - AP will reboot!

I searched google and got some more info.

(Aruba3200) #show ap license-usage

AP Licenses
-----------
Type                      Number
----                      ------
AP Licenses               0
Overall AP License Limit  0

AP Usage
--------
Type             Count
----             -----
Active CAPs      0
Standby CAPs     0
RAPs             0
Remote-node APs  0
Tunneled nodes   0
Total APs        0

Remaining AP Capacity
---------------------
Type  Number
----  ------
CAPs  0
RAPs  0

Can I somehow use the mobility controller and one Aruba AP without licenses.

thanks

uv.

No.  You need a license..