Wireless Access

Hi Guys, im trying to convert a new rap155 (being using rap5s before) im getting the attached error stating image verify failed.. 

 

I then get an output that is also attached.

 

Any one have any idea whats causing the issue? 

 

Any help here is greatly appriciated! 

 

Regards

Anthony

 

What AOS are you using ? Do you have AOS 6.3 installed ?

 

 

MINIMUM SOFTwARE VERSIONS
•
ArubaOS™
6.3.0.0
•
Aruba
Instant
3.3.0.1

 This is why Victor ask you about the firmware

 

Cheers

Carlos

Hi Guys,

 

The 3200 is on 6.2.1.4

The RAP155 is on 6.3.1.1-4.0.0.1_41049

 

So im guessing the controller is out of date already? 

 

Thanks

Anthony

Your 3200 needs to be on AOS6.3 in order to support rap155
http://www.arubanetworks.com/pdf/products/DS_RAP-155.pdf

Is this a 3200XM or just regular 3200?

Tim Cappalli | ACCP / ACMP / CCNA
Network Engineer | Brandeis University
cappalli@brandeis.edu | (617) 701-7149

Hi Guys,

 

Thanks for your help on this, It looks like im going to have to get the aruba controller upgraded to 6.3 which leads me on to my next few questions: 

 

If I upgrade the secondary partition to 6.3 and something goes wrong and im not able to connect back to the web interface, is it the case of connecting to the console to use/swap back to the primary partition or is there a button sequence on the controller (for a less technical) person to use? 

 

We do have an aruba partner on hand IF we have any problems but as we have just had this new controller installed in november we feel they didnt upgrade maybe to force our hands a little... 

 

Has anybody had any issues upgraded from 6.2 to 6.3 yet? 

 

Any help will be greatly appreciated! 

 

Thanks

Anthony

Please see below link if it is useful for you..

http://community.arubanetworks.com/t5/Unified-Wired-Wireless-Access/Firmware-Upgrade-Best-Practise/m-p/93516/highlight/true#M16057

---

@Arjwalker wrote:

Hi Guys,

 

Thanks for your help on this, It looks like im going to have to get the aruba controller upgraded to 6.3 which leads me on to my next few questions: 

 

If I upgrade the secondary partition to 6.3 and something goes wrong and im not able to connect back to the web interface, is it the case of connecting to the console to use/swap back to the primary partition or is there a button sequence on the controller (for a less technical) person to use? 

 

We do have an aruba partner on hand IF we have any problems but as we have just had this new controller installed in november we feel they didnt upgrade maybe to force our hands a little... 

 

Has anybody had any issues upgraded from 6.2 to 6.3 yet? 

 

Any help will be greatly appreciated! 

 

Thanks

Anthony

---

ArubaOS 6.3.1.2 Went GA (General Availability) Friday:  http://community.arubanetworks.com/t5/Unified-Wired-Wireless-Access/Recent-AOS-Firmware-Releases/m-p/135437#M28904