Wireless Access

Frequent Contributor I

factory defaulted 620 controller out of flash space

We factory defaulted a 620 controller and when we run the quickstart configuration from the CLI it lets us answer the questions but will not let us store it and gives the following error.



WARNING: There is only 2 MB left on the flash. At least 5 MB of free flash space is recommended to keep the system stable. Please clean-up your flash filesystem.


basically we have accessto the CPBoot prompt and that is IT.   doesanybody knowhow we can delete fies and clean up the drive on this controller


Thanks in advance

Kelly K
Guru Elite

Re: factory defaulted 620 controller out of flash space

Use the console to bring up the controller, then delete the files from the commandline.  Files in the flash are not deleted upon a factory reset.


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Knowledgebase
Airheads Learning Videos
Remote Access Point Solution Guide
ArubaOS Consolidated Release Notes
ArubaOS 8 ViA VPN Solution Guide
Search Airheads
Showing results for 
Search instead for 
Did you mean: