Wireless Access

Reply
Highlighted
All-Decade MVP 2020

fast fail-over inquiry?

If I have 4 Controllers

 

2x Master-active and Standby

2x locals with (AP fastfailover configure) Active active

 

and I have terminated 100 AP on local controller 1 and 100 AP on local controller 2nd I have 500 clinet connected on each controller and as I knew that client state state will be sync ,so thats mean I will see 1000 clinet on each controller? inside the dashboard?


Accepted Solutions
Highlighted
Guru Elite

Re: fast fail-over inquiry?

You will not see clients on the second (standby) controller.  Client state sync refers to synchronizing the client 802.1x key on the second controller so that it does not have to do a 4-way handshake upon failover to the second controller.


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Knowledgebase
Airheads Video Knowledge Base
Remote Access Point Solution Guide
ArubaOS Consolidated Release Notes
ArubaOS 8 ViA VPN Solution Guide

View solution in original post


All Replies
Highlighted
Guru Elite

Re: fast fail-over inquiry?

You will not see clients on the second (standby) controller.  Client state sync refers to synchronizing the client 802.1x key on the second controller so that it does not have to do a 4-way handshake upon failover to the second controller.


*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Knowledgebase
Airheads Video Knowledge Base
Remote Access Point Solution Guide
ArubaOS Consolidated Release Notes
ArubaOS 8 ViA VPN Solution Guide

View solution in original post

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: