Wireless Access

Reply
Highlighted
Contributor II

firewall cp using netdestination

Is it possible to use netdestination for firewall cp?

I found this documentation describing the function, but don't see a way.
My lab is currently down and I can't test, so I was just curious if it is possible to reference a net destination like you can in ACLs. 

https://www.arubanetworks.com/techdocs/ArubaOS_6_5_3_X_Web_Help/Content/ArubaFrameStyles/1CommandList/firewall_cp.htm

I am currently running 6.5.4.8

Moderator

Re: firewall cp using netdestination

it is not possible, the CLI command does not accept "alias" as a parameter

 

(7010) (config-fw-cp) #ipv4 permit ?
A.B.C.D                 IPv4 source address
any                     Any IPv4 source address
host                    A single IPv4 host address
(7010) (config-fw-cp) #

 

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: