Wireless Access

last person joined: 22 hours ago 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

firewall cp using netdestination

This thread has been viewed 1 times

  • 1.  firewall cp using netdestination

    Posted Dec 06, 2018 02:39 PM

    Is it possible to use netdestination for firewall cp?

    I found this documentation describing the function, but don't see a way.
    My lab is currently down and I can't test, so I was just curious if it is possible to reference a net destination like you can in ACLs. 

    https://www.arubanetworks.com/techdocs/ArubaOS_6_5_3_X_Web_Help/Content/ArubaFrameStyles/1CommandList/firewall_cp.htm

    I am currently running 6.5.4.8



  • 2.  RE: firewall cp using netdestination
    Best Answer

    EMPLOYEE
    Posted Dec 07, 2018 07:22 AM

    it is not possible, the CLI command does not accept "alias" as a parameter

     

    (7010) (config-fw-cp) #ipv4 permit ?
A.B.C.D                 IPv4 source address
any                     Any IPv4 source address
host                    A single IPv4 host address
(7010) (config-fw-cp) #