Hi,
In the master I got this
(SMPWAP1) #show ap database
AP Database
-----------
Name Group AP Type IP Address Status Flags Switch IP Standby IP
---- ----- ------- ---------- ------ ----- --------- ----------
SMPAP1 Yoti_default 215 10.222.123.6 Down 2 10.222.123.2 10.222.123.3
SMPAP2 Yoti_default 103 10.222.123.14 Down 2 10.222.123.2 10.222.123.3
SMPAP3 Yoti_default 215 10.222.123.13 Down 2 10.222.123.2 10.222.123.3
SMPAP4 Yoti_default 215 10.222.123.12 Down 2 10.222.123.2 10.222.123.3
SMPAP5 Yoti_default 215 10.222.123.9 Down 2 10.222.123.2 10.222.123.3
SMPAP6 Yoti_default 215 10.222.123.11 Down 2 10.222.123.2 10.222.123.3
SMPAP8 Yoti_default 215 10.222.123.10 Down 2 10.222.123.2 10.222.123.3
In the local I got this
(SMPWC2) #show ap database
AP Database
-----------
Name Group AP Type IP Address Status Flags Switch IP Standby IP
---- ----- ------- ---------- ------ ----- --------- ----------
Flags: U = Unprovisioned; N = Duplicate name; G = No such group; L = Unlicensed
I = Inactive; D = Dirty or no config; E = Regulatory Domain Mismatch
X = Maintenance Mode; P = PPPoE AP; B = Built-in AP; s = LACP striping
R = Remote AP; R- = Remote AP requires Auth; C = Cellular RAP;
c = CERT-based RAP; 1 = 802.1x authenticated AP; 2 = Using IKE version 2
u = Custom-Cert RAP; S = Standby-mode AP; J = USB cert at AP
i = Indoor; o = Outdoor
M = Mesh node; Y = Mesh Recovery
This is the config on the master
(SMPWAP1) #show configuration | begin redundanc
master-redundancy
master-vrrp 1
peer-ip-address 10.222.123.3 ipsec 8a71f6105b11d7144f7eed4d0ec36e78fcfd206233bb1544
!
This is the config on local
(SMPWC2) #show configuration | begin redundanc
master-redundancy
master-vrrp 1
peer-ip-address 10.222.123.2 ipsec e649b3a722bf78598c2ac8f897c29c84ffb9f758d38c7c52
!