Wireless Access

Reply
Contributor I

how to enforce the traffic to exit from loopback interface ?

hello all , i have 2 controllers acting as master local , and two radius servers , the two servers configured to receive the authintication request from loopback interfaces of the controller , i reset the controllers and configured them from scratch , the packet became exit from the interface vlan which is connected point to point with the core switch !

 

how can i enforce the packet to exit from loopback interface ?

Guru Elite

Re: how to enforce the traffic to exit from loopback interface ?

https://community.arubanetworks.com/t5/Controller-Based-WLANs/How-do-I-configure-the-source-interface-for-a-Radius-server/ta-p/177858


| Tim Cappalli | Aruba Security | @timcappalli | timcappalli.me |

NOTE: Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba or Hewlett Packard Enterprise.
Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: