- Here is process for resetting the login password. Please use the Password Recovery process:
Please login using console with a serial cable (e.g. you must be infront of the controller):
Login : password
Password: forgetme!
Then go into enable mode with pwd “enable”
Config terminal
#Mgmt-user admin root
<hit enter to setup the new root password>
Once done logout and login back in with the new password.
Do not forget to execute #write memory in order to save the new password.
- If you are looking to decrypt the wireless security key which you have setup for your wireless network. Please execute #encrypt disable and then execute #show run, under the config you will see the wireless key in clear text under your VAP profile section.