No. The client just told me that the other company is offering him a few APs and multiple antenas from those APs and putting those antenas in the warehouse rows... thats it.
From the begginng he told me that, i told him that, it was not a good idea, and from the design point of view is not right.
I told him that he has to take in mind that the lost of dbs he will have from the long cable going from the AP to the antennas, and that the multiple antennas were for the MIMO and it should not be used that way, like the other forum member said it should not be used to cover more area( i should have tell him this way sounds a way simple formthe way i say it :) )
I told him my design will be a way more expansive but i cannot give him a bad design, i mean, just to sell him something, i would just give him a good design that i know it will works otherwise i wont. And as my own policy i dont promese anything to the client that i cannot do or it cannot be done right... and i cannot do the correct coverage with a few APs to that warehouse.
I came here to look for more reasons as well of course i dont know everything :)
What i did was putting a design in the visual RF and explained it my design and why i was using that quantity of APS, that you should take in mind that the warehouse is fulll all to the top of products... and well other things.
Cheers
Carlos