thanks clembo
this is a standalone, but in the GUI there are two tiers of control: Mobility Controller and Aruba7010_2E_D8_6C Cannot find documentation why is presented in GUI this way for a standalone setup.
The APs come up with flags 2IL
(1) (Aruba7010_2E_D8_6C) [mynode] #show log system 004e35c4811e
^
Error : Expecting integer from 1 to 65535
(2) AP Database
-----------
Name Group AP Type IP Address Status Flags Switch IP Standby IP
---- ----- ------- ---------- ------ ----- --------- ----------
Ar-AP01 default 535 172.17.60.31 Up 2m:58s 2IL 172.17.60.8 0.0.0.0
Ar-AP02 default 535 172.17.60.32 Up 2m:59s 2IL 172.17.60.8 0.0.0.0
Ar-AP03 default 535 172.17.60.33 Up 2m:59s 2IL 172.17.60.8 0.0.0.0
(3) #show ap license-usage
AP Licenses
-----------
Type Number
---- ------
AP Licenses 5
RF Protect Licenses 0
PEF Licenses 0
Controller License True
Overall AP License Limit 0
AP Usage
--------
Type Count
---- -----
Active CAPs 0
Standby CAPs [Counted Against Total] 0
Active RAPs 0
Remote-node APs 0
Active MUX 0
Active PUTN 0
Total APs 0
Remaining AP Capacity
---------------------
Type Number
---- ------
CAPs 0
RAPs 0
(Aruba7010_2E_D8_6C) [mynode] #show license client-table
Built-in limit: 0
License Client Table
--------------------
Service Type System Limit Server Lic. Used Lic. Remaining Lic. FeatureBit
------------ ------------ ----------- --------- -------------- ----------
Access Points 32 5 0 5 enabled
Next Generation Policy Enforcement Firewall Module 32 0 0 0 enabled
RF Protect 32 0 0 0 enabled
Advanced Cryptography 2048 0 0 0 disabled
WebCC 32 0 0 0 disabled
MM-VA 33 0 0 0 disabled
MC-VA-RW 32 0 0 0 disabled
MC-VA-EG 32 0 0 0 disabled
MC-VA-IL 32 0 0 0 disabled
MC-VA-JP 32 0 0 0 disabled
MC-VA-US 32 0 0 0 disabled
VIA 2048 0 0 0 enabled
(4) Built-in limit: 0
License Client Table
--------------------
Service Type System Limit Server Lic. Used Lic. Remaining Lic. FeatureBit
------------ ------------ ----------- --------- -------------- ----------
Access Points 32 5 0 5 enabled
Next Generation Policy Enforcement Firewall Module 32 0 0 0 enabled
RF Protect 32 0 0 0 enabled
Advanced Cryptography 2048 0 0 0 disabled
WebCC 32 0 0 0 disabled
MM-VA 33 0 0 0 disabled
MC-VA-RW 32 0 0 0 disabled
MC-VA-EG 32 0 0 0 disabled
MC-VA-IL 32 0 0 0 disabled
MC-VA-JP 32 0 0 0 disabled
MC-VA-US 32 0 0 0 disabled
VIA 2048 0 0 0 enabled
This little set was up and running last week finally, then the controller moved to new location (same trunking setup). At the same time, the provisional AP license expired, but the purchased AP license should have replaced that.