Wireless Access

last person joined: yesterday 

Access network design for branch, remote, outdoor, and campus locations with HPE Aruba Networking access points and mobility controllers.
Back to discussions
Expand all | Collapse all

"aruba_start_scan_ol 753 Issue scan failled" logs

This thread has been viewed 0 times

  • 1.  "aruba_start_scan_ol 753 Issue scan failled" logs

    Posted Dec 02, 2016 06:04 PM

    Hi,

     

    We are seeing the below KERNEL logs in our controller.  Wondering if anyone has seen this before and knows what it is.  We are seeing about 2000 of these logs in the last hour between 9 AP's.

     

    Controller: 7210

    OS: 6.4.4.10

    AP's: AP325

     

    "Dec  2 15:42:31  KERNEL((ap-name@(ap-ip): [1622731.262686] aruba_start_scan_ol 753 Issue scan failled"

     

    Any feedback will be appreciated.



  • 2.  RE: "aruba_start_scan_ol 753 Issue scan failled" logs

    EMPLOYEE
    Posted Dec 03, 2016 04:30 AM

    You should open a tac case.  That does not look familiar.



  • 3.  RE: "aruba_start_scan_ol 753 Issue scan failled" logs

    Posted Dec 16, 2016 03:54 PM

    Hopefully this helps someone down the line.  Below is the TAC response we got for this issue.

     

    "got an update from the development team that the log message is not critical and it will not impact the performance of the AP. The reason of the message is scanning cost time is longer than expected, which is most possibly caused by interference in air."