01-28-2015 12:41 PM
I am a K-12 with 4000+ remote ap environment. I am tring to convert to a tunneled network. The tagging ID of 411 and 911. These vlans defineded on our brocade switch network. When I assign a vlan to my VAP profile do I need to define an ipaddress and a dhcp-helper address on the controller vlan?
ip address xx.xx.xx.xx
ip dhcp-helper xx.xx.xx.xx
Solved! Go to Solution.
01-28-2015 12:43 PM
If your L3s are upstream of the controller, then you do not need them on the controller.
The one exception to that rule would be if you are using a captive portal. In that case, you do need an IP on that subnet.
Re: ssid tagging from remote to tunneled network
01-29-2015 10:04 AM