Wireless Access

Reply
Highlighted
Occasional Contributor I

Re: unable to provision AP from GUI

Yes, for example....

 

(aruba) (config) #ap-name AJ0288555 Name_XXXX-YYYY_ZZZZ
                                                                       ^
% Invalid input detected at '^' marker.

 

Above is what it looked like.

Highlighted

Re: unable to provision AP from GUI

Try ap-rename not ap-name

Cheers
James
----------------------------------------------------------------------
--------------------------@whereisjrw--------------------------
---------------------------------blog-------------------------------
ACCX #540 | ACMX #353 | ACDX #216 | AMFX #11
----------------------------------------------------------------------
----------------------------------------------------------------------

If a reply adequately addresses your issue, please click on the "Accept as Solution" and "Give Kudos" button so this information can benefit other users via search.
Highlighted
Contributor I

Re: unable to provision AP from GUI

there is the spacing in between and i guess that is the reason that it is not working as the rest of my ap is without spacing. Also i tried the ap-rename command that getting the same error as tecniq

Highlighted
Guru Elite

Re: unable to provision AP from GUI

use quotes around the ap name with spaces.

*Answers and views expressed by me on this forum are my own and not necessarily the position of Aruba Networks or Hewlett Packard Enterprise.*
ArubaOS 8.5 User Guide
InstantOS 8.5 User Guide
Airheads Knowledgebase
Airheads Video Knowledge Base
Remote Access Point Solution Guide
ArubaOS Consolidated Release Notes
ArubaOS 8 ViA VPN Solution Guide
Highlighted
Contributor I

Re: unable to provision AP from GUI

thanks it is working and i can now provision the ap from GUI.

 

The actual command shall be (Aruba3400) (config) #ap-rename serial-num xxxxxxxxx "xxxxxxx"

Highlighted
Occasional Contributor I

Re: unable to provision AP from GUI

Thanks people. This worked for me too.

Highlighted
Occasional Contributor II

Re: unable to provision AP from GUI

Thanks for this post. Help me with my issue as well.

ACMP - Feb 2014
Highlighted
Retired Employee

Re: unable to provision AP from GUI

If possible, please mark this post as solved. Appreciate it. 

 

--
HT
Highlighted
Frequent Contributor I

Re: unable to provision AP from GUI

This issue is fixed in version 6.1.3.0 

I know this because i reported the issue to Aruba :)

 

While working with techsupport we discovered it was because of the spaces in the name and they worked the fixed into the next release. 

View solution in original post

Highlighted
Contributor I

Re: unable to provision AP from GUI

Sorry, missed the 2nd page, saw after I posted.

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: