Wireless Access

Reply
Highlighted
Occasional Contributor II

unable to push AP group attribute from Aruba Activate for one AP

Hi Team,

 

We have converted the IAP to CAP and AP shows in the MD but it comes up in default ap-group. But we have mentioned a different AP-group in the provisioning rule and the same is present in the MD [8.6].

 

Thank you in advance!

Highlighted
Super Contributor I

Re: unable to push AP group attribute from Aruba Activate for one AP

Can you share the provisioning rule? You can also use an AP whitelist to put the AP in the correct group.

 

 

Dustin Burns
Senior Mobility and Access Engineer @WEI
ACMX#509 | ACCP | ACSA | ACDA | ACEA | CCNP | CCDP | CCNA Wireless

If my post address your queries, give kudos and accept as solution!
Highlighted
Occasional Contributor II

Re: unable to push AP group attribute from Aruba Activate for one AP

Hi,

 

Thank you for your response. the rule is as below:

Rule Type: Provisioning Rule

Parent Folder: ABC

Provisioning Type: IAP to CAP (controller)

AP Group: test

controller: MD IP

Persist Controller IP : Checked

Rule name: IAP to CAP

Create date: Today

Created by: XX.

 

CPsec disabled.

 

Thank you!

 

Highlighted
Super Contributor I

Re: unable to push AP group attribute from Aruba Activate for one AP

I'm not 100% sure, but you might have to import the Activate AP whitelist into the controller. You can have automatic whitelist sync set up between the controller and Aruba activate. I'm not able to get into my lab to check right now, but maybe you could try that?

 

 

Dustin Burns
Senior Mobility and Access Engineer @WEI
ACMX#509 | ACCP | ACSA | ACDA | ACEA | CCNP | CCDP | CCNA Wireless

If my post address your queries, give kudos and accept as solution!
Highlighted
Occasional Contributor II

Re: unable to push AP group attribute from Aruba Activate for one AP

Hi,

 

Thank you for the update.

 

Do we have to use "import the Activate AP whitelist into the controller" even when CPsec disabled?

 

 

Highlighted
MVP Expert

Re: unable to push AP group attribute from Aruba Activate for one AP

AP-Group assignment is not supported , when using IAP to CAP provisioning rule

You can create a ap provisioning rule in the controller , that can dynamically place Aps in the desired AP-Group based on the following conditions: ap-type , ip-range, network
https://www.arubanetworks.com/techdocs/ArubaOS_84_Web_Help/content/arubaframestyles/1commandlist/ap_provisioning-rule.htm

Sent from Mail for Windows 10
Thank you

Victor Fabian
Lead Mobility Architect @WEI
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
Highlighted
Occasional Contributor II

Re: unable to push AP group attribute from Aruba Activate for one AP

Hi,

 

Thank you so much for your response. AP-Group assignment is not supported , when using IAP to CAP provisioning rule : do we have any document which updates the same so i can share it with end user.

 

Thank you!

Highlighted
MVP Expert

Re: unable to push AP group attribute from Aruba Activate for one AP

Here you go:

2020-05-20 11_00_44-Aruba Activate.png

Thank you

Victor Fabian
Lead Mobility Architect @WEI
AMFX | ACMX | ACDX | ACCX | CWAP | CWDP | CWNA
Highlighted
Occasional Contributor II

Re: unable to push AP group attribute from Aruba Activate for one AP

Spoiler
Hi Victor,

Thank you for your response. But end user is able to map the ap-group in the rule.

Thank you!
Highlighted
Occasional Contributor II

Re: unable to push AP group attribute from Aruba Activate for one AP

Hi Victor,

Thank you for your response. But end user is able to map the ap-group in the rule.

Thank you!

Search Airheads
cancel
Showing results for 
Search instead for 
Did you mean: